Ahoj, přenastavil jsem mikrotik, na kamery se dostanu ale nemohu se dostat ani pingnout na sfp port, netušíte prosím proč ?
<--- ia0 -->Bez názvu-1.jpg<--- ia0 -->
# model = 960PGS
/interface bridge
add name=bridge1 protocol-mode=none vlan-filtering=yes
/interface ethernet
set poe-out=forced-on
set poe-out=forced-on
set poe-out=forced-on
/interface wireless security-profiles
set supplicant-identity=MikroTik
/interface bridge port
add bridge=bridge1 interface=sfp1 pvid=247
add bridge=bridge1 interface=ether2 pvid=81
add bridge=bridge1 interface=ether3 pvid=81
add bridge=bridge1 interface=ether4 pvid=81
add bridge=bridge1 interface=ether5 pvid=249
add bridge=bridge1 interface=ether1
/interface bridge vlan
add bridge=bridge1 tagged=sfp1 untagged=ether2,ether3,ether4 vlan-ids=81
add bridge=bridge1 tagged=sfp1,ether5 vlan-ids=249
add bridge=bridge1 tagged=sfp1 untagged=ether5 vlan-ids=247
/ip address
add address=192.168.1.1/24 interface=bridge1 network=192.168.1.0
add address=10.22.247.3/24 interface=sfp1 network=10.22.247.0
/ip route
add distance=1 gateway=10.22.247.254
budu rád za každou pomoc!
děkuju