Našel jsem, vyzkoušel jsem a.............funguje. Jo - ehm - abych to neprodlužoval - tady je podrobnej návod jak na crashnutej dlink : : :
You can try the following crash recovery procedure:
- download the firmware onto your PC
- Assign a static IP Adress as 192.168.0.11 ; 255.255.255.0 to your LAN-connection
- press the reset button for 15 sec, then unplug the power cord - reset remains pressed
- after 10 sec plug in the power again - reset remains pressed
- after 5 sec release the reset button, the router will start again
- Open your browser and type in http://192.168.0.50
- The AP will ask for a new firmware now with a crash recovery page
Sometimes you have to repeat this procedure a few times until it works.